Skip to content
Fallout Remover

Fallout Remover

Regular price £108.99
Tax included.Shipping calculated at checkout.
Size: 20 Litres
Quantity

Colour‑Changing Fallout Remover — Reactive Iron Decontamination Gel

Our Colour‑Changing Fallout Remover targets and dissolves embedded ferrous particles (brake dust, rail dust, industrial fallout) on paintwork, wheels and glass. The reactive sulfur‑based chemistry converts iron contamination into a water‑soluble complex, turning the product a vivid purple as it works — a clear visual cue that the surface is ready to rinse.

Performance Highlights

Attribute Benefit
Active colour‑change indicator Turns clear to deep purple on contact with iron, showing exactly when decontamination is complete.
pH‑balanced (4 – 5) Acid‑free and safe on clear‑coat, alloys, plastics and glass when used as directed.
Low‑mist, clinging formula Stays where you spray — ideal for vertical panels and intricate wheel designs.
Odour‑controlled Reduced sulfur odour versus conventional thioglycolate systems, making workshop use more pleasant.
Non‑corrosive to metals (finished surfaces) Optimised inhibitor package prevents flash‑rusting on bare steel rotors.

Typical Physical Data*

Appearance Clear to slightly hazy colourless liquid
Odour Pungent (low‑sulfur)
pH (20 °C) 4.3 – 5.5
Density Approx. 1.06 g mL‑1
Transport classification Not regulated

*Values are typical and may vary within normal manufacturing tolerances.

Application Guidelines

  1. Pre‑clean — Wash loose dirt from the surface; work on a cool panel out of direct sunlight.
  2. Apply — Spray evenly over the area; product will begin to react within 15–30 seconds.
  3. Dwell — Allow 2–5 minutes for full colour change. Do not let the product dry.
  4. Agitate (optional) — Use a soft detailing brush on heavily contaminated wheels.
  5. Rinse — Thoroughly pressure‑rinse to remove all residue, then proceed with finishing steps.

Packaging & Storage

Supplied in 1 L, 5 L, 25 L, 200 L and 1 000 L IBC containers.
Store sealed at 5–30 °C out of direct sunlight. Shelf life: 24 months from manufacture date.

Safety & Regulatory

Classified under UK‑CLP as Acute Toxicity 4 (H302) — harmful if swallowed and Skin Sensitiser 1A (H317) — may cause an allergic skin reaction.
Wear nitrile gloves and eye protection when handling. Avoid breathing mist and wash hands after use. In case of skin contact, wash with plenty of water; seek medical advice if irritation or rash occurs. Refer to the current Safety Data Sheet (SDS) for full first‑aid, spillage and disposal guidance.

For technical support, bulk supply or private‑label enquiries, please contact the Innovation Chem technical service team.

Fallout Remover

Regular price £108.99

Cart

Your cart is currently empty.