Chromance - Hybrid Detailer

Ensure the vehicle is fully cleaned and decontaminated from other products. 

Apply a small amount of the product to a foam/ microfibre applicator and work panel by panel, spreading the product thinly and evenly across the surface. 

Work the product into the panels using one of the below methods:

1. Using small, overlapping circular motions, or, 
2. The ‘crosshatch’ style; moving it in straight lines across the panel one way and the at 90o in the other direction. 

Allow the applied product to cure for 5-15 minutes depending on the ambient temperature and humidity.  

Fold a clean microfibre buffing cloth into four and without pressure begin removing the left-over product.  

Rotate the towel to reveal a fresh side frequently for best results.

This product does not need diluting and should be used neat.

Carefully swipe a finger through the wax once applied and note how the product moves under your fingertip. If it smears on the surface and leaves a greasy mark it is usually too early to remove. If the product is removed cleanly and smear free; it is a good indication that the product is cured and ready to come off.