Skip to content
Glue & Tar Remover

Glue & Tar Remover

Regular price £116.99
Tax included.Shipping calculated at checkout.
Size: 20 Litres
Quantity

Glue & Tar Remover — Rapid-Acting Solvent Blend

GTR Glue & Tar Remover breaks down adhesive residues, road tar, tree sap and under-body bitumen in seconds. The high-solvency formula—rich in xylene and hydrotreated light distillates—lifts contamination that alkaline or pH-neutral cleaners cannot touch, flashing off cleanly to leave paintwork ready for refinement or protection.

Performance Highlights

Attribute Benefit
Powerful aromatic solvent system Dislodges tar spots, adhesive residues and overspray without excessive dwell time.
Fast flash-off (≈ 30 s) Speeds panel preparation in body-shops and detailing studios.
Clear-coat & trim safe Leaves no oily film; wipes away with a clean microfibre.
Controlled viscosity Clings to vertical surfaces, reducing product run-off and waste.

Typical Physical Data*

Appearance Blue liquid
Odour Characteristic solvent
Flash point (closed cup) 29 °C
Relative density (20 °C) ≈ 0.84 g mL-1
Water solubility Negligible
Transport classification UN 1307 • Class 3 • PG III

*Typical values; normal manufacturing tolerances apply.

Application Guidelines

  1. Preparation —Work on a cool panel out of direct sunlight.
  2. Apply —Spray onto a microfibre or foam applicator (avoid flooding). Dab-wipe contaminated area.
  3. Dwell —Allow 30–60 s; do not let product dry.
  4. Remove —Wipe away dissolved residue with a clean towel, then wash the panel with a pH-neutral shampoo.
  5. Repeat  for heavy deposits; reduce dwell time on fresh paint.

Packaging & Storage

Supplied in 1 L, 5 L, 25 L, 200 L and 1 000 L IBC containers.
Store in a well-ventilated, flame-proof cabinet at 5–25 °C, away from ignition sources. Shelf life: 24 months (unopened).

Safety & Regulatory

Danger — Highly flammable liquid and vapour (H225). May be fatal if swallowed and enters airways (H304). Harmful in contact with skin (H312) or if inhaled (H332). Causes skin irritation (H315) and serious eye irritation (H319).

  • Keep away from heat, sparks, open flames and hot surfaces.
  • Use only outdoors or in a well-ventilated area; avoid breathing vapour.
  • Wear nitrile gloves, solvent-resistant apron and eye protection.
  • IF SWALLOWED: Do NOT induce vomiting. Call a poison centre/doctor immediately.
  • Dispose of contents/containers in accordance with local regulations.

For technical support, bulk supply or private-label enquiries, please contact the Innovation Chem technical service team.

Glue & Tar Remover

Regular price £116.99

Cart

Your cart is currently empty.